1060 aluminum plate for battery explosion-proof valve

1060 aluminum plate contains 99.6% aluminum, also known as pure aluminum plate. 1060 aluminum plate has good elongation and tensile strength, which can fully meet the normal processing requirements (stamping, drawing), high formability, 1060 cold rolled aluminum plate Widely used in lamps, signs, curtain walls, insulation and other fields; and 1060 hot-rolled 0.1mm thickness aluminum coils are used in automotive parts.
1060 aluminum plate – o state battery cap (also called explosion-proof valve) Usage: For car, charging treasure and 18650 model battery, to prevent the battery from being fully charged and continue to charge after the battery explosion occurs, after the battery is full, automatically Power off.

1060 aluminum plate for automotive battery explosion-proof valve:

Energy-saving emission reduction, new energy vehicles are widely used in our lives. For example, buses have been re-using new energy electric power several years ago, and the power is all from the battery, which is the core of new energy power, so that the battery The safety performance is also receiving attention.
Automobile explosion-proof valve has obvious advantages:
1 spring principle design, realizes ventilating pressure/pressure relief explosion-proof cycle;
2 cycle explosion-proof, safe and lossless, more economical;
3 metal shell, good resistance, high strength;
4 small size, adaptability Extremely high;
5 threaded mounting for easy assembly.
Aluminum for automobile battery explosion-proof valve has its own advantages. It adopts aluminum explosion-proof valve. Aluminum alloy is easy to be processed and formed, which reduces material waste and has strong economical and practicality. The aluminum alloy battery explosion-proof valve can automatically power off after the battery is fully charged. Prevent the battery from being continuously charged, resulting in a battery explosion, which is safer and more secure. The aluminum alloy most suitable for use in the explosion-proof valve of the battery should belong to the 1060-O state aluminum alloy, and the large battery package is used for the plate as the battery explosion-proof valve.
Safety valves on new energy vehicles are generally used in the thickness of 0.3mm-0.5mm, width 14mm, 22mm and 25mm, strength of up to 2.2-2.5MPA 1060-O state aluminum plate, and an ordinary new energy vehicle explosion-proof The valve dosage is about 3 kg, which meets the national production regulations.

1060 aluminum plate for 18650 battery explosion-proof valve:

The 18650 means 18 mm in diameter and 65 mm in length. The model number of the No. 5 battery is 14,500, 14 mm in diameter and 50 mm in length. Generally, the 18650 battery is used in the industry, and there are few civilians. The common ones are used in laptop batteries and high-end flashlights.
Lithium batteries will increase their internal pressure when they are overcharged. In order to avoid the explosion of the sealed metal casing, usually the 18650 battery will be equipped with a safety valve at the top. When the internal pressure of the battery is too high, the top safety valve will automatically pop out to decompress.

18650 lithium battery production needs to have a protection circuit to prevent the battery from being overcharged and causing discharge. Of course, this is a must for lithium batteries, and the 1060-O aluminum coil can meet the 18650 explosion-proof flameproof. The 1060-O aluminum coil thickness tolerance is plus or minus 0.005mm. The composition is uniform and stable. At 22-25Mpa, it prevents explosions and explodes, and has excellent performance.