5052 aluminum sheet properties

Mingtai 5052 aluminum plate is an AL-Mg alloy aluminum plate. It is a widely used rust-proof aluminum. This alloy has high strength, especially with anti-fatigue strength: high plasticity and corrosion resistance, and can not be heat-treated. The plasticity is good in semi-cold hardening, low plasticity in cold work hardening, good corrosion resistance, good weldability, poor machinability and polishing.

The 5052 al-mg alloy also contains a small amount of manganese, chromium, beryllium, titanium, etc. Except for a small amount of solid solution, most of the manganese in the alloy forms MnAl6. The effect of chromium in 5052 aluminum plate is similar to that of manganese, which can improve the resistance to stress corrosion cracking, improve the strength of base metal and welding seam, and reduce the tendency of welding crack, but its content generally does not exceed 0.35%.

5052 aluminum sheet properties

Good corrosion resistance, good welding, good cold workability, and with moderate strength, good formability, moderate strength, can be polished.

Hardness: the tensile strength of 1060 aluminum plate is between 110-130, while the tensile strength of 5052 series is between 210-230, which means that the hardness of 5052 is 100% higher than that of 1060.

Elongation: the elongation of the 1060 series is 5%, while the elongation of the 5052 series is between 12-20%. It can also be considered that the elongation of the 5052 series is increased by about 200% when the 5052 series is 100% harder than the 1060 series.
Chemical properties: 1060 is pure aluminum plate, 5052 is alloy aluminum plate, under special circumstances 5052 aluminum sheet better corrosion resistance.

The 5000 series aluminum alloys represent the 5052, 5005, 5083, 5A05 series. 5000 series aluminum plate belongs to the commonly used alloy aluminum plate series. The main element is magnesium, which contains 3-5% magnesium. Also known as aluminum magnesium alloy. The main features are low density, high tensile strength, high elongation, good fatigue strength, but can not be strengthened by heat treatment. The weight of al-mg alloy is lower than other series in the same area. 5000 series aluminum plate is one of the mature aluminum plate series in China.

Henan mingtai aluminum group, as a 20 years old aluminum processing enterprise, can produce 1-8 series aluminum plate with foil, pay attention to brand, integrity, service, cooperation and other codes of conduct, is willing to provide you with professional material selection advice, good processing, distribution and after-sales service with its rich professional knowledge and experience.