5182 aluminum alloy

The 5182 Al-Mg alloy is a representative product of aluminum alloy with medium strength and good corrosion resistance. From thin to thick plates are widely used in all fields.

5182 aluminum alloy-aluminum alloy plate for machining

It is an alloy with high magnesium content. It is a non-heat treatable alloy. with good strength, good corrosion resistance and machinability. And the surface is beautiful after cathodic treatment. The arc welding performance is good. The main alloying element in 5083 alloy is Mg, which has good corrosion resistance and weldability, as well as medium strength. The excellent corrosion resistance makes the 5083 alloy widely used in maritime applications such as ships, as well as automotive, aircraft welding parts, subway light rail, pressure vessels fire protection with strict requirements (such as liquid tank trucks, refrigerated trucks, refrigerated containers), refrigeration devices, TV towers, drilling equipment, transportation equipment, missile parts, armor, etc.

5182 aluminum alloy range of use

5182 aluminum alloy belongs to Al-Mg-Si alloy and has a wide range of applications, especially in the construction industry as the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and moderate strength. The main alloy element of 5182 is magnesium, which has good formability, corrosion resistance, weldability, and medium strength. It is used to manufacture aircraft fuel tanks, fuel pipes, and sheet metal parts for transportation vehicles and ships, instruments, street lamp brackets and rivets hardware products, electrical enclosures, etc.
Al-Mn alloy is the most widely used rust-proof aluminum. This alloy has high strength, especially with fatigue resistance, high plasticity and corrosion resistance, can not be strengthened by heat treatment. The plasticity is good when hardened by semi-cold work, low plasticity when hardened by cold work. Good corrosion resistance, good weldability, poor cutting performance, can be polished. It is mainly used for low load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil pipes.
The Mn content of 5182 aluminum is low, and the strength of the finished product is low, which is beneficial to the material forming. 5083 aluminum has high Mn content, the main purpose is to improve the strength, welding, and corrosion resistance. The strength of 5083 aluminum alloy is at least 30Mpa higher than that of 5182 alloy. Therefore, 5182 aluminum alloy is an industry-recognized material for cold deformation.
The 2 series, 6 series and 7 series can not be regarded as large deformation materials, so 5182 is the best.