Aluminum Sheet Suppliers Introduce Aluminum Tread Plate and Dyeing

Aluminum Tread Plate is favored for its decorative, corrosion-resistant, slip-resistant and lightweight materials. It is used in many large factories, office buildings, entrances to shopping plazas, and electrical enclosures. Tread Plate material.
The general pattern aluminum plate has 1 series pure aluminum plate, 3 series aluminum manganese alloy aluminum plate, 5 series aluminum magnesium alloy aluminum plate, representative of 1060 Aluminum Tread Plate, 3003 Aluminum Tread Plate, 5052 Aluminum Tread Plate and 5754 Aluminum Tread Plate, of course, Some places with special requirements for performance are 6061, 6063 pattern aluminum plates. In life, the pattern aluminum plate is used in a wide range, such as refrigerators, air conditioners, cars, platforms, packaging pipes, screen frames, various hanging beams, table legs, decorative strips, handles, wire troughs and covers, and chair tubes. Wait. Industrial applications of tread plates are also very numerous, such as the use of 5052 pattern aluminum plates on the deck. The characteristics of the pattern aluminum plate are mainly corrosion resistance, wear resistance, non-slip, low carbon environmental protection, easy coating, good physical properties, easy processing and other performance characteristics, it is very good, and has good interface characteristics, easy to coat, use Good performance, strong hardness and so on.

However, the manufacturer of Aluminum Tread Plate will encounter the problem of unsatisfactory dyeing in the production process, resulting in poor dyeing effect of aluminum plate. The following Mingtai Aluminum industry will give you an analysis of how to solve this problem.

1.choose a good aluminum sheet material

In the production process, usually high-purity aluminum, aluminum-magnesium, aluminum-manganese alloy after anodizing, its dyeing function is the best, can be dyed into a variety of colors. For plates with relatively heavy silicon or copper, only dark and black can be dyed during the dyeing process, which is more monotonous.

2.Control the thickness of the oxide film

The oxide film refers to the thickness, porosity, transparency, and the like of the aluminum film layer. The thickness of the film layer in the aluminum plate can be maintained at 10 um or more, and the porosity and transparency can obtain a good dyeing effect.

3.Grasp the concentration of the dye solution

There is a certain relationship between the concentration of the aluminum plate and the dyeing. If the aluminum plate is lightly colored, the concentration can be lower, and the concentration of the dark color can be higher. Generally, the aluminum plate material produced is dyed in a relatively light color with a color of 0.1-0.39 g/L, a light color of 1 g/L, a dyed dark color of 3-5 g/L, and a densely colored color of 10-15 g/L. If the concentration of dyeing is high, it will cause uneven color or floating color, and it is easy to appear “streaming” during cleaning and closing. In order to enhance the adsorption of dyeing, the dyeing is carried out using a low concentration of color, so that the dye molecules can penetrate into the pores of the oxide film more uniformly, which makes the dyed color more harmonious and firm.

4.Control the temperature of the dyeing solution

The dyeing of aluminum sheets is divided into cold dyeing and thermal dyeing. Cold dyeing is used in the production process of Aluminum Tread Plate for a long time, and the dyed color uniformity is better. The use of thermal dyeing is relatively short, and it is difficult to control the color. The temperature of the thermal dyeing is usually 40-60 ° C. If the temperature is too high, the adsorption of the dye is reduced, and the surface of the aluminum plate is easily embossed.

Aluminum Tread Plate Supplier

The pattern aluminum plate produced by Henan Mingtai Aluminum Co., Ltd. has a high quality product and has a large share in the domestic and foreign markets. In particular, the company produces a ribbed plate with a market share of 60-70% in the North American market, of which 1.6 The tread plate occupancy below the thickness of mm is 80%. Mingtai Aluminum is a listed company specializing in deep processing of aluminum. It can produce 1-8 series and many other varieties of products. Mingtai has won the favor of new and old customers with excellent product quality. The products sell well at home and abroad.