6061 Aluminum Tread Plate

General Classification of 6061 Aluminum Tread Plate

1. Ordinary alloy aluminum tread plate. The aluminum purity of this tread plate can reach 99.00% or more. Since it does not contain other technical elements, the production process is relatively simple, can adapt to the normal environment, and the price is relatively cheap. Most of the current circulation on the market is the 1050 and 1060 series.
2. Al-Mn alloy aluminum tread plate. Its strength is slightly higher than ordinary alloy aluminum tread plate, but the hardness and corrosion resistance are less than 5000 series tread plate, usually 3000 series aluminum tread plate.
3. Al-Mg alloy aluminum tread plate. The main element is magnesium, and the magnesium content is between 3-5%. The aluminum tread plate is mainly characterized by low density, high tensile strength and strong corrosion resistance, and is usually applied in special places. In the same area, its weight is lower than the other two. The representative products are 5052.5083.

Introduction of 6061 Aluminum Tread Plate

6061 aluminum tread plate is an AL-Mg-Si alloy, which belongs to the third classification mentioned above, but because of the addition of Si, the performance is better than that of the 5000 series Al-Mg alloy, which can meet more stringent requirements. For example, In the refrigerator, freezer, air conditioning field, as well as the high-altitude environment requiring heavy load capacity, 5000 series products are not recommended. But, 6063 embossed aluminiun plate is our most assured purchase.

Application of 6061 Aluminum Tread Plate

1.6061 alloy’s main alloying elements are magnesium and silicon, which have excellent corrosion resistance, so they can be used in places with high corrosion or rust and corrosion. For example, in extremely humid environments such as reservoirs and refrigerators, the service life can be more than 50 years.
2. Because of its high strength, it has strong bearing capacity. For the hanging space, where the staff needs to step on it, you can safely choose the 6061 aluminum tread plate with a thickness of not less than 6.0mm, which can ensure the safety of the staff to the utmost extent.
3. It has a variety of beautiful patterns, among which the aluminum tread plate with willow-shaped is widely used in the design of the building (floor) platform, which is very decorative and can also meet the anti-slip requirements of the architectural design. The 6061 aluminum tread plate produced by Mingtai Aluminum has a rib, two ribs, three ribs, a small five ribs, a large five ribs, and a pointer style.

Advantages Mingtai 6061 Aluminum Tread Plate

1. Mingtai 6061 aluminum tread plate has strong corrosion resistance and no stress corrosion cracking tendency.
2. In the production process of Mingtai, the columnar crystal structure of the ingot is less, the grain is fine, and the forging ability is strong.
3, Mingtai mature anodizing treatment technology, so that the surface of the 6061 aluminum tread plate has the same color and beautiful appearance.
4, 6061 pattern aluminum alloy has excellent weldability, including gas welding, arc welding, contact spot welding and wire welding.

Technical Parameters of 6061 Aluminum Tread Plate

Typical alloy：6061 aluminum tread plate
Main ingredient(%)：Mg:0.8-1.2 Si:0.40-0.8 Cu:0.15 Ti:0.15 Mn:0.15 Cr:0.04-0.35
Materisl status：H*2、H*4、T4、T6
Thickness（mm）：1.2-7.0
Width（mm）：100-1650
Typical product: High-altitude spiral staircase, building (floor) platform design, reservoir, refrigerator, freezer, air conditioning