7005 Aluminum vs 6061 Properties In Needed Status

Overview of 7005 Aluminum vs 6061

7005 aluminum sheet belongs to the 7000 series Al-Zn-Mg alloy and is the hardest aluminum in the other 6 series alloys. 7005 aluminum can be heat treated and strengthened. When compared with 7005 aluminum vs 6061, its strength is not as good as 6061 aluminum. The 7005 aluminum sheet is light in weight. It is a typical lightweight aluminum material, and because 7005 aluminum welding has significant advantages, it does not need to be expensive heat treatment process, welding can be performed well, so it is used in a large number of bicycle frame manufacturing. It is no wonder that we have a flying feeling in driving and improve our cycling experience. Also, after 7005 aluminum welding can’t be solidified, and this feature can also be used to make sports equipment, such as our favorite tennis rackets and softball bats.

The 6061 aluminum in the 7005 aluminum vs 6061 belongs to the 6000 series of Al-Mg-Si alloys, which are significantly different from the 7000 series aluminum alloys. Of course, the 7005 aluminum vs 6061 properties are different. For example, 7005 aluminum vs 6061 mechanical properties is slightly different. 7005 aluminum has an ultimate tensile strength of 350 MPa, a fatigue strength of 150 MPa, a density of 2.78 g/cm3, a yield strength of 215 MPa, an elongation of 11%, and an electrical conductivity of 40-49. The 6061aluminum has an ultimate tensile strength of 310 MPa, a fatigue strength of 96.5 MPa, a density of 2.70 g/cm3, a yield strength of ≥110 MPa, an elongation of ≥14%, and an electrical conductivity of 40-49.

7005 Aluminum vs 6061 Properties In Needed Status

7005 aluminum properties in needed status

7005-t5aluminum: means that the 7005 aluminum sheet is cooled by a high-temperature molding process and can be directly straightened and leveled without cold working to obtain the corresponding 7005 aluminum properties. Under T5 temper, 7005 aluminum properties include a tensile strength of 345 Mpa, a specified yield strength of 305 MPa, an elongation of 9%, and an electrical conductivity of 40-49.

7006-t6 aluminum :7005 aluminum sheet is solution heat treated and then not cold worked to reach the t6 state. 7005-t6 aluminum properties contain a tensile strength of 350 Mpa, a specified yield strength of 290 MPa, an elongation of 8%, and a conductivity of 40-49.

6061 aluminum properties in needed status

6061 t6 aluminum: Similar to the 7005-t6 aluminum processing technology, 6061 t6 aluminum has a high hardness, and its oxidation effect is good at around HV90 degrees. Also commonly used is 6061-T651aluminum, which is a high-quality aluminum alloy produced by heat treatment pre-stretching process.

The utility of 7005 aluminum vs 6061 in practical application is reflected in: 6061 aluminum is the most common aluminum material, light, strong, and economical. The 7005 aluminum plate is light aluminum, the strength is not as good as 6061, but it is much lighter and the price is also high. If you want to combine the advantages of 7005 aluminum vs 6061, then the 7075 aluminum plate will be the solution you want. It is the lightest and strongest aluminum, but it is also very expensive! Even the strength of the 7075 aluminum is no less than steel.

Mingtai 7005 Aluminum vs 6061

Mingtai 6061 vs 7005 aluminum supplier was established in 1997. It is a large-scale modern aluminum processing manufacture integrating scientific research, processing and manufacturing. It has Zhengzhou Mingtai Industrial Co., Ltd., Zhengzhou Mingtai New Material Co., Ltd. and Zhengzhou South Locomotive. Rail transit equipment Co., Ltd. and other six holding companies, the company has more than 5,000 employees, total assets of 6 billion yuan, with six semi-continuous casting production lines, 10 continuous casting and rolling production lines, 44 other large processing equipment, annual output It reached 770,000 tons, ensuring that 7005 aluminum vs 6061 demand for global users is quickly met.