How to improve the quality of 6061 aluminum plate

6061 aluminum plate is widely used, the market demand is large, and the manufacturers are not infrequent. If the enterprise wants to stand out among many manufacturers, strict quality control is very important. Below, Mingtai Aluminum will introduce how to improve the quality of 6061 aluminum alloy.

Mingtai aluminum plate manufacturer introduced the quality of 6061 aluminum plate from three aspects:

First of all, for the development of aluminum plate manufacturers, technology is the first productivity, aluminum plate manufacturers must have a strong technical team, but also need to introduce advanced production equipment, which provides favorable conditions for the production of high-quality 6061 aluminum alloy.
Secondly, it is critical to check the raw materials. Aluminum ingots are important raw materials for the production of aluminum sheets, so it is necessary to pay attention to the selection of high-quality materials for production when selecting.
Finally, it is to accumulate experience, with experience, it can reduce the probability of defective products and improve the quality of 6061 aluminum alloy.
The 6061 aluminum plate is a promising aluminum alloy, and its application in automobiles is a major direction. 6061 aluminum alloy can be used with automobile hubs and chassis, and has the advantages of light weight, safety and environmental protection compared with steel plates, which can reduce fuel consumption and reduce exhaust gas emissions, and has high recovery rate of aluminum and good environmental protection. Therefore, more and more aluminum alloys are used in automotive lightweighting.

Advantages of 6061 aluminum panels for automotive wheels:

1, 6061 aluminum plate hardness is appropriate. The main alloying elements of the 6061 aluminum sheet are magnesium and silicon, with medium strength and hardness ranging from 95 to 100 HB. Compared with steel plates, it has good processing properties and is not easily deformed.
2, 6061 aluminum plate wear resistance is good. 6061 aluminum plate has good plasticity and excellent corrosion resistance, especially the tendency of stress-free corrosion cracking, wear resistance, durability and high toughness, which is suitable for automobile wheels.
3, 6061 aluminum plate has good heat dissipation. The heat dissipation of the aluminum alloy wheel hub is better than that of the steel wheel hub. The heat of the wheel hub is the heat generated by the friction between the wheel and the air when the wheel is rapidly rolling. The heat is also the heat generated by the tire contacting the ground during fast driving, and then transmitted to the wheel hub. Aluminum alloy wheels also increase tire life and reduce the risk of puncture.
4, 6061 aluminum plate is light and has high recovery rate. The 6061 aluminum plate has a low density, which is advantageous for handling, can reduce fuel consumption, and has high recycling value of aluminum.

Mingtai 6061 aluminum plate specifications:

Mingtai Aluminum is a large-scale manufacturer of 6061 aluminum sheets in China, which can produce 6061 aluminum sheets with a thickness range of 0.30-600mm and a width range of 150-2600mm.
6061 aluminum alloy has three states: T6, F and O. Among them, 6061T6 aluminum plate is used more. The 6061 medium plate is quenched by medium and thick plate. Medium and thick plate slicing – stretching machine – aging treatment – sawing machine – polishing – packaging . The whole production cycle is about 10 days. After the solution heat treatment, it does not need to be cold-worked, and can be straightened and leveled without affecting the mechanical properties.

Mingtai 6061 aluminum plate manufacturer:

Mingtai Aluminum is a 6061 aluminum plate manufacturer with a strong scale in the industry. It has sufficient strength and production capacity. It has long-term supply of high-quality 6061 aluminum alloy with smooth surface, bright surface and no milling surface. The market reputation is very good.