Category: News

6061 aluminum plate is widely used, the market demand is large, and the manufacturers are not infrequent. If the enterprise wants to stand out among many manufacturers, strict quality control is very important. Below, Mingtai Aluminum will introduce how to improve the quality of 6061 aluminum alloy. Mingtai aluminum plate manufacturer introduced the quality of […]

The outer panel of the automobile engine is generally made of aluminum alloy material, which can better reduce the noise of the engine, and can also isolate the heat generated when the engine works, which can better protect the paint surface on the hood surface and prevent it. Aging, with the entry of cars into […]

6061 aluminum plate belongs to Al-Mg-Si alloy, medium strength, good plasticity and corrosion resistance, good weldability and good oxidation effect. In the production process of 6061 aluminum sheet, a small amount of copper or zinc is sometimes added to increase the strength of the alloy without significantly reducing the corrosion resistance; there is a small […]

Aluminum plate manufacturer introduction – aluminum plate for oxidation Alumina plate means that the aluminum plate is placed in the corresponding electrolyte as an anode, and electrolysis is carried out under specific conditions and an applied current. The usual oxidation methods are anodization and chemical oxidation. After oxidation, a thin layer of aluminum oxide is […]

Aluminum sheets for automobiles are a major direction for aluminum sheet consumption. There are many components in the car. The aluminum plates are different in type, mainly based on 5 series and 6 series aluminum plates. The most common is to use the 5182 aluminum plate to manufacture the car door, hood and front and […]